Wireless Infrared Monitor Sensor Detector Entry Doorbell Alarm Transmitter


Free Shipping

Description :

Wireless Infrared Monitor Sensor Detector Entry Doorbell Alarm Transmitter

Infrared Sensor Doorbell, Split-design, People Was On The First Floor, Second Floor Will Alarm, You're Worth It!

Specification :
Color : White
Material : Plastic
Sensor Operating Voltage : DC 3V (Two 5th batteries manufactured without battery)
Receiver Operating Voltage : DC 9V (9V battery a laminated, manufactured without battery)
Transmitting Frequency : 315MHZ
Transmission Distance : 100 Metres (In open environment without hindrance and without distraction)
Infrared Sensing Distance : 3-7 m
Ring Tones : The Classic Singles (TO ALICE)
Size :
Transmitter : 6.5 x 3.5 x 9cm
Receiver : 6 x 4.7 x 9cm
Features :  

1. Special Series Equipment, Sensitivity, Accurate And Anti-jamming Technologies, Effectively From A Variety Of Environmental Monitoring Within The Human Body In Movement.
2. Not Just One Bell, Can Also Be Used As A Greeting, The Alarm Or Alert
3. Detection Range Is Accurate And Automatically Give A Pleasant Music, Sensor Light Can Freely Switch.
4. Probe With Infrared Sensors And More Suitable For Shops, Homes, Office Buildings, Factories And Other Occasions.

Follow The Steps For Usage :

1. Place The Correct Batteries In The Detector In The Receiver Units.
2. Make Sure That The Batteries Have Been Put InThe Proper Positions.
3. Switch Button To ON Which Is Located Inside The Detector Unit After Installing Batteries.
4. Mount The Detecet Properly By The Front Door, Window Frame, Driveway, Walkpath, Backyard Or Anywhete You Need.
5. Then Switch On The Receiver And Adjust The Volume To Either HI Or LO Position.
6. Now The Remote Detective System Is Opetrating With The Infrared Detect Technology.
7. Plance The Receiver In An Easy To Reach Place.
8. When The Detecet Senses Motion, The Receiver Will Make An Audible Souned The LED Light Will Flash.
9. Please Wait For 30 Seconds After Switching On Detective Receiver To Activate.
10. Pleasse Install Both Units 3 Feet Above Grornd Level For Optimal Performance .

Care Maintenance Portion :

1. Important : jplease Keep The Detector Receiver In Sheltered Places To Avoid Contact Of Both Units From Water And Direct Sunlight.
2. When The LED Indicator Does Not Go On The Battery Power Is Elther Low Or Dead, At That Time You Should Change The Batteries.
3. Clean The Detective Regularly With A Damp Cloth To Avoid Blockage Of Sensor By Dirtor Any Small Particles.
4. Try To Keep It In Areas Where It Will Not Get Wet. In Additiong, During Heavy Storms Snowfalls, It Is Recommended That Unit Should Be Moved Indoor Or In A Safe Place .
5. Never Attemptto Take Apart The Units.
6. When The Unit Is Not In Use, Take Out All Batteries, Clean Both Units And Store The Units In Dry, Cool Place.
7. This Device Is Not A Toy And Should Keep Out Of Reach From Children.

Package includes :  

1 x Transmitter
1 x Receiver
2 x Mounting Brecelets
1 x Manual
Details pictures :  


you can track your packages after an order has shipped.