4.3Inch TFT LCD Car Rear View Monitor+CMOS Waterproof Night Vision Reverse Camera
Car Rear View Monitor
1.Easy to install and use
2.High resolution display
3.Low power consumption
4.Supports screen rotatable
5.Stick on your car firmly and stablely
6.No audio and input or output
7.Full color LED backlight display
8.4.3” LED Backlight Color TFT LCD monitor
9.It helps to avoid incidents and accidents abrasion well
10.Support Car DVD, VCD, GPS, camera, STB, satellite receiver, and other video equipment
11.With 2 AV input, AV1 connects to car DVD, VCR and other video equipment, AV2 to car backup camera
12.With menu button, brightness/ contrast/ hue/ saturation/ language( Chinese/ English/ Spanish) adjustable
13.Park rear view priority: The monitor will start up automatically, and synchronous display the video from rear view camera when you are backing your car, the monitor will close itself after backing
Aspect Ration: 4:3
Screen size: 4.3 inch
Power supply: DC 9V-36V
Housing Material: ABS
Video input: Two way video input
Display Component: Color TFT LCD
Car Rear View Camera
1.Anti fog glass.
2.CMOS imaging sensor.
3.Support NTSC video system.
4.Embedded mounting in rear bumper.
5.Snap-in design, it is easy to install.
6.High sensitivity and low power consumption.
7.High-definition and 170 degree wide viewing angle.
8.Water-proof, shock-proof and anti-jamming functions.
9.It helps to avoid incidents and accidents abrasion well.
10.Extra-low illumination of 0.5 Lux for clear night vision.
11.Its simple and modest design and small size won't draw any attention.
12.This camera can give you a full sight of the back of your car when you are driving.
13.To protect your car from collision with invisible obstacle, choose a high definition and good quality camera as ours.
14.Perfect solution to get rid of that poor rear view visibility on your car, boat, trailer, camper, truck or any vehicle that has no rear-view mirror or poor rear vision.
15.Connect to any type of monitor with a composite yellow RCA jack for crystal clear resolution mounted inside will fit into most vehicle key holes, no other installation needed.
3.TV System: NTSC
4.S/N Ratio: >48dB
6.Power: DC 12V±10%
7.White Balance: Auto
8.Camera Size: 22*21mm
9.Sync. System: Internal
10.Video Cable Length: 6.0m
11.Video Output: 1.0Vpp, 75Ohm
12.Length Angle: 120~170 degree
13.Cable Length of Camera: 59cm
14.Scanning System: 2:1 Interlace
15.Power Supply Cable Length: 41cm
16.Image Reverse: Left-right mirror
17.High grade of waterproofing: IP66
18.Horizontal Resolution: 420 TV lines
19.Effective Pixels: NTSC: 510(H) * 492(V)
20.Current Consumption: No More Than 300mA
21.Image Sensor: CMOS 1/4 MT9V125 or PC1030, color
22.Minimum Illumination: 0.2 Lux/ F1.8(0 Lux with LED)
23.Storage Temperature: -30℃ to + 60°C, 95% RH maximum
24.Operating Temperature: -20℃ to + 60°C, 95% RH maximum
25.Electronic Shutter: 1/50 to 1/100,000 seconds, 1/60 to 1/100,000 seconds
1.Mount the camera inside the keyhole of your vehicle.
2.Adjust the lens of the camera to its best position.
3.Connect power cord to connect to your vehivle DC 12V power system.
4.Connect the video output of the camera to the display in your vehicle.
1 X Video Cable
1 X Power Cable
1 X Installation of Visual Reversing
1 X Car Rear View Camera
2 X Screws
you can track your packages after an order has shipped.